AVCWare Video Converter Platinum Tutorial

This step-by-step tutorial will guide you to convert high-definition and general video files for playback on different multimedia devices using AVCWare Video Converter Platinum.

Before you start, please download, install and launch AVCWare Video Converter Platinum.

• Getting started
• Trim video segment
• Crop area size
• Add and adjust effects
• Create watermark

Getting started

1. Add files
   Click Add File(s) button on the toolbar, select video or audio files you want to convert in the dialog box that opens, and add them into the file list.
2. Select output format
   Choose one or more files in the file list, and open Profile drop-down list, then select an output format for selected files. You can also set different formats for different files.
   Tip: To adjust the output settings, click Settings button next to Profile drop-down list, and set the parameters of output format in the Advanced Profile Settings dialog box that opens.
3. Set output folder
   Click Browse button in the settings panel, select a destination folder in the dialog box that opens, and click OK.
   Tip: Before converting, you can clip video segment, crop area size, add effects, and create video watermark to colorize your output file.
4. Convert file
   After finishing the above settings, check the files needed to convert in the file list, and click Convert Checked Item(s) button on the toolbar to start converting. You can view the progress from the progress bar at the bottom of the window.

Trim video segment
The software provides you with trim tool to extract the segment you like from the source.

1. Select a video/audio file in the file list, click Edit button on the toolbar and choose Trim option to open Trim window.
2. Click Play button to play the selected file.
3. When it comes to the very start point you want, click Set Start Point button to set it as start point. And when it comes to the end point you want, click Set End Point button to set it as end point.
   Tip: You can drag the slider or enter the time value you want in the Start and End textbox to adjust the start and end point.
4. Then click OK button to return to the main interface.

Crop area size
Select the file you want to edit from the file list, and click Edit button on the toolbar and choose Effect option to open Effect window. Click Crop button in the left window to open crop setting panel.

1. Check Enable Crop check box.
2. Set Crop Area Size: Click the up and down arrow to adjust the height and width of the crop area. If you check Keep Aspect Ratio check box, the height and width will be changed proportionally.
3. Set Position of Crop Area: Click the up and down arrow of Left Margin and Top Margin to adjust the left margin and top margin of the crop area.

1. Click Restore Defaults button, to restore the default settings.
2. You can also adjust the crop area by dragging the central and surrounding handles in the preview window to adjust the crop area.

Add and adjust effects
Select the file you want to edit from the file list, and click Edit button on the toolbar and choose Effect option to open Effect window, then click Effect button in the left window to go to the effect setting panel.

1. Check Enable Effect check box.
2. Set Brightness: click and drag brightness control slider or enter a value in the Brightness textbox to set the brightness of the video.
3. Set Contrast: click and drag contrast control slider or enter a value in the Contrast textbox to set the contrast of the video.
4. Set Saturation: click and drag saturation control slider or enter a value in the Saturation textbox to set the saturation of the video.
5. Set Other Effects: choose an effect for the output video from the Other Effects drop down list.

Create watermark
Select the file you want to edit from the file list, and click Edit button on the toolbar and choose Effect option to open Effect window. Click Watermark button in the left window to open watermark setting panel, then check Enable Watermark checkbox.

• Add text watermark
  1. Click Add Text Watermark option.
  2. Enter the text for watermark.
  3. Adjust the watermark options as below:
     Set watermark Transparence: drag watermark transparence control slider to set the transparence of the watermark, or enter a number to set watermark transparence in the Transparence textbox.
     Set watermark Vertical Position: drag watermark vertical control slider to set the vertical position of the watermark, or enter a number to set watermark vertical position in the Vertical Position textbox.
     Set watermark Horizontal Position: drag watermark horizontal control slider to set the horizontal position of the watermark, or enter a number to set watermark horizontal position in the Horizontal Position textbox.
     Set watermark Font Style: click Setting button, and set font style in the Choose Font dialog box that opens.
• Add picture watermark
  1. Click Add Picture Watermark option.
  2. Click Browse button, and select a picture or video for the watermark from the windows that opens.
  3. Adjust the watermark options as below:
     Set watermark Transparence: drag watermark transparence control slider to set the transparence of the watermark, or enter a number to set watermark transparence in the Transparence textbox.
     Set watermark Vertical Position: drag watermark vertical control slider to set the vertical position of the watermark, or enter a number to set watermark vertical position in the Vertical Position textbox.
     Set watermark Horizontal Position: drag watermark horizontal control slider to set the horizontal position of the watermark, or enter a number to set watermark horizontal position in the Horizontal Position textbox.
     Set Watermark Size: type the wanted value or click the up and down arrow to adjust the height and width of the watermark size. If you want to keep the aspect ratio, then check Keep Aspect Ratio check box.

Tips:

1. Click Restore Defaults button, to restore the default settings.
2. You can also adjust the vertical and horizontal position of the watermark by dragging the green lines in the preview window, to set the position of the watermark.
3. After editing the video effect, you can click "Comparing Preview" button at the right-bottom of the preview window to preview the original and fixed frames at the same time for comparing.